Issue Bb3 On Reset View

Discussion in 'Buildbox 3.0' started by mmicoe, Feb 19, 2021.

  1. mmicoe

    mmicoe Avid Boxer

    Joined:
    Dec 20, 2016
    Messages:
    148
    Likes Received:
    41
    Hello,
    I'm working with a scene and if I do
    View -> Scene View -> Reset View

    the scene is shown upside down in my work area!
    It reverses the scene and I don't know how to return to the original state! If I play the scene it shows fine...
    I attach you Screenshot1 -> The original Scene
    Screenshot2 -> after Reset View -> Scene is upside!!!!!!!

    Please, help!
    I'm completely unemployed. I can't continue with my project.

    BB 3.3.7 B#4157
    Waiting for some solution!
    Mauro
     

    Attached Files:

    Last edited: Feb 19, 2021
  2. Hue Buildbox

    Hue Buildbox Administrator Staff Member

    Joined:
    May 11, 2017
    Messages:
    456
    Likes Received:
    209
    Hi there,
    Can you send a copy of your bbdoc to me at support@buildbox.com, I'll take a look and see if I can resolve this issue for you.
     
  3. mmicoe

    mmicoe Avid Boxer

    Joined:
    Dec 20, 2016
    Messages:
    148
    Likes Received:
    41
    hello. I just sent it!

    Thank you!
     
    Hue Buildbox and Sean Buildbox like this.
  4. mmicoe

    mmicoe Avid Boxer

    Joined:
    Dec 20, 2016
    Messages:
    148
    Likes Received:
    41
    Hello, I detected another issue: (this is not a critical issue!)

    1. If you change the scale x or y to negative, in an entity object, the object cannot be selected in the main design view.
    Attached screenshot:
    e1: you can select the object fine
    e2: if you change -1*X or -1*Y, the object entity cannot be selected.

    All the best,
    Mauro
     

    Attached Files:

    • e1.png
      File size:
      22 KB
      Views:
      2
    • e2.png
      File size:
      23 KB
      Views:
      2
  5. Hue Buildbox

    Hue Buildbox Administrator Staff Member

    Joined:
    May 11, 2017
    Messages:
    456
    Likes Received:
    209
    Hi and thanks again. However, I was not able to reproduce this bug. If possible can you send me the bbdoc, so I can further investigate?
     
  6. mmicoe

    mmicoe Avid Boxer

    Joined:
    Dec 20, 2016
    Messages:
    148
    Likes Received:
    41
    Hi Hue,
    I don't need to send you a bbdoc.
    Not a mistake from my bbdoc...
    You can check it by following these steps using the buildbox 3 template:
    FIRST ISSUE:
    1. Open Buildbox 3 -> Create game -> Choose template -> Select Platformer
    2. Drag and Drog any object (png Asset)
    On the MenĂº bar:
    Select View -> Scene View -> Reset View
    You will see that everything disappears!
    And the object you dragged is inverted!
    If you try to select the object you will find that you cannot select it.
    This is a very critical error!

    SECOND ISSUE:
    The second mistake has to do with the first.
    1. Open Buildbox 3 -> Create game -> Choose template -> Select Platformer
    2. Drag and Drog any object (png Asset)
    3. You can select the object using the mouse!!
    4. Now, in this scale object : X:1 Y:1 --> Select X:-1 Y:1
    5. If you try to select the object you will find that you cannot select it!!!!
    This is not a very critical error, but it has to do with the first issue!!!!

    ;) As you can see, it occurs in 2D worlds!!!!!

    Do you understand me?

    BB3 version: 3.3.7 4157#
    Regards,
    Mauro
     
    Last edited: Feb 20, 2021
  7. Hue Buildbox

    Hue Buildbox Administrator Staff Member

    Joined:
    May 11, 2017
    Messages:
    456
    Likes Received:
    209
    Ok, thanks for clarifying. So for 2D objects, both "X & Y Scale axis should have positive values or both negative values to be visible, unless you check the "2 Sided" box from the 3D Model node. You can also reselect the png image from the Outliner panel. So, the second one is not a bug, but thanks anyway.
     

    Attached Files:

  8. mmicoe

    mmicoe Avid Boxer

    Joined:
    Dec 20, 2016
    Messages:
    148
    Likes Received:
    41
    Yes, but there are a lot of objects that by default, they do not have the Model3D node by default!
    And if you Reset the View, selecting 2 Sided : does not working!!!!
    The scene is inverted!
     
  9. mmicoe

    mmicoe Avid Boxer

    Joined:
    Dec 20, 2016
    Messages:
    148
    Likes Received:
    41
    You can select 2 Sided all nodes and --> Test to Reset the View....
    The scene is inverted!!!!
     
  10. mmicoe

    mmicoe Avid Boxer

    Joined:
    Dec 20, 2016
    Messages:
    148
    Likes Received:
    41
    Adding Model 3D -> Selecting 2 Sided -> Now, I can select the object (SOLVED)

    Now, the first i remains to be solved!! Thanks!
    Mauro
     
    Hue Buildbox likes this.
  11. Hue Buildbox

    Hue Buildbox Administrator Staff Member

    Joined:
    May 11, 2017
    Messages:
    456
    Likes Received:
    209
    No problem, anytime!
    Yes, the first issue remains and we are currently investigating. Thanks again!
     
    Sean Buildbox likes this.

Share This Page